What size unit do I need?

Several factors are involved when making the decision as to size. The first thing to consider is the available area for the unit. Measure the area available taking into account any overhead obstructions such as power lines, trees, overhangs etc. Keep in mind that the overall dimensions of the unit needed will be considerably larger than what is being stored. Get accurate dimensions of the vehicle or items to be covered. These dimensions must take into account all accessories such as luggage racks, antenna, air-conditioning units etc. When you have these dimensions contact our sales associates for suggestions on size and style.

Which style is better for snow, House or Round?

The two styles are very similar to each other with respect to there strength in snow prone area’s. However, the House or Peak style does have some increased interior space due to the straight sidewalls and is recommended for everyday “garage” type use. Wider garages necessitate the use of the “peaked” roof, to allow for useable height at the sides. Our units use a steep pitch to its roofs to ensure that snow and ice slide off easily. The Round style buildings do allow for the snow to slide off more easily. In heavy snow prone areas we can provide reduced rafter spacing to make the frames stronger. 3’ Rafter spacing vs. standard 4’ Rafter spacing.

Can the shelters handle my weather year round?

The products we provide use only the highest quality materials and are designed for extreme weather conditions year round. From the blazing sun in the southwest to the snow and extreme cold in the Midwest and New England. Our years of experience and field-testing have shown that properly installed; our units can resist all types of weather. As a New England based company we have seen our shelters come through some of the worst weather on record. Our larger trussed shelters have engineering specifications of up to 60 pound per square foot snow loads and 100 MPH wind loads.

How difficult is assembly?

Most of our residential shelters with either the bolt-together or self-tapping screw design can be installed in just a few hours with basic hand tools and 2-3 people. The unit arrives to you ready to assemble and all hardware is included. The unit arrives to you ready to assemble, no punching, cutting or welding is require. All required hardware is included as well as Step-by-Step instruction. We also have representatives available 7 days a week to provide assistance over the phone with installation or technical questions. *Some structures require minor drilling or self-tapping screw installation. Detailed instruction manuals are also included with a toll free phone number for assistance.

What type of material is used?

Nova-Thene® Rip stop woven poly olefin is a, UV treated, triple laminate polyethylene. Polyethylene is the same material used in most tarps; this is where the similarity ends. Our fabrics are made of a “triple laminate” design. This means that an outer layer of UV Treated, waterproof material is laminated to a mesh or “Rip-Stop” inner core. On the inside a UV Treated, White inner layer is also laminated to the mesh. This produces a material that is completely impervious to water and wind, is incredibly strong; up to 380lb/ft. tear strength, and in the case of the Heavy Duty material will last in the worst weather for years. The Double Stack weave provides unmatched strength to weight ratios. Please take a look at our Buyer's Guide for more details.

How are the shelters anchored for wind?

Anchor systems are designed to ensure that your shelter is anchored safely and securely. The type of system used with your shelter should be based on the size of your shelter and the type of surface to which you are securing your shelter. We have several anchor systems available to secure your unit in a variety of conditions. Your garage must be anchored securely to keep it in place and to provide structure support. Anchors are available for Dirt, Asphalt, Concrete, and Wood. Please consult with one of our experienced sales associates for the proper anchoring system for your conditions.

Is a building permit required for assembly?

In most instances, a permit is not required due to the building’s temporary nature. Because the buildings are not permanent structures and they can be moved easily. However, it is always best to check your local regulations prior to purchase.

Do I need to pay property tax on my building?

Due to the temporary nature of our buildings, you will most likely not need to pay taxes. Check with your local assessor's office to be sure.

Do you offer customer pick up?

Yes we do offer customer pick up at our local warehouse on some of our products. Please contact one of one sales representatives for more information

What are your shipping charges?

Shipping charges vary by product and your "ship to" address. We use a "freight shopping" program to insure the best possible shipping rate. Express or 2-day shipping options are available on some products at a higher price. Please fill out our freight quotes form for more details or contact us.

What colors are available?

See our fabric specifications and color chart. The inner layer is always white to reflect ambient light and make the inside of the unit brighter. Unlike some of our competitors, who use colored interiors, which make it dark and difficult to work in.

What type of warranty is offered?

In most cases a 1  year manufacture defect replacement warranty is offered depending on the product. On custom units, the manufacture offers a 10 year limited warranty on their cover material. Please contact us for more details.

Will I be able to buy replacement parts?

Yes, we sell all the individual replacement parts for the units we carry. Please contact one of our "sales associates'' with your needs.